BPX Male Y | Nickel Plated Brass Push in Fitting, Push to Connect Fitting
BPX nickel plated brass push in fitting male Y is used to connect a female threaded connection to two tubes running in the same direction in a Y configuration for narrow space. The body of nickel plated brass push in fitting male Y with threaded connections can be rotated after installation to allow for variations in tube direction. Nickel plated brass push in fitting male Y is made of nickel-plated brass for durability and corrosion resistances. Male Y nickel plated brass push in fittings can be used with polyethylene, polyurethane, FEP & nylon tubing, the flexible tubing is easily connected by simply inserting the tubing end into the fitting. To release the tubing, press the circular release ring and the tubing can be easily pulled out. Male Y nickel plated brass pneumatic fittings have hexagonal thread allowing tightening with wrench. In this category you can find metal push-in fittings with threads in following sizes: R (PT, BSPT) 1/8 to R (PT, BSPT) 1/2, and NPT 1/8 to NPT 1/2 for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-32 UNF to 1/2 NPT
Body Material: Nickel Plated Brass
Thread Material: Nickel Plated Brass
Sealing: NBR
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F