SPBP Male Branch Tee | Stainless Steel Push in Fitting with Plastic Release Sleeves
SPBP stainless steel push in fitting with plastic release sleeves male branch tee is used to connect a female threaded connection to two tubing at 90-degree angles, the body and thread is made of 316 stainless steel or higher strength and greater corrosion resistance than 304 stainless steel, the release sleeves are made of Polyacetal (POM), the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Male elbow stainless steel push to connect fitting with plastic release sleeve has swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner. In this category you can find stainless steel push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to R, PT, BSPT 1/2, and 10-24 UNC, 10-32 UNF, 1/8 NPT to 1/2 NPT, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-32 UNF to 1/2 NPT
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Release Button Material: Polyacetal (POM)
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F