Pneuflex PC 04-M4 male connector push in fitting is designed to for use with 4 mm Nylon, Polyethylene and Polyurethane tube to connect a female M4x0.7 threaded port in same direction. Metal body is made of non-corrosive, non-contaminant nickel-plated brass. Male connector push in fitting is easy to insert or pull the tube (no tools required to connect and disconnect tubing). Please use straight cut tube before inserting into the fitting. Composite push in fitting male straight connecor is suitable for use with air bag, air suspension, pneumatic tools, air compressor, and etc... External tightening with a flat wrench.
Part NO.: PC 04-M4
Push in Tubing O.D: 4mm
Thread Size: M4X0.7
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Body Material: Nickel Plated Brass
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Sealing and O-ring: NBR
Working Pressure: 0—1.0 MPa | 0—150.0 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: 0～60°C | 32～140°F
Lock Claw: Stainless Steel (SUS)
Applicable: PU / PA / PE / PVC
Push in Tubing O.D: 4mm
Thread Size: M4X0.7
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Body Material: Nickel Plated Brass
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Sealing and O-ring: NBR
Working Pressure: 0—1.0 MPa | 0—150.0 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: 0～60°C | 32～140°F
Lock Claw: Stainless Steel (SUS)
Applicable: PU / PA / PE / PVC
Dimensions of PC 04-M4x0.7 Push in Fitting
