BPL 04-M5, 4 mm O.D Tubing, M5 x 0.8 Thread Male Elbow Nickel Plated Brass Push in Fitting
Pneuflex BPL 04-M5 male elbow nickel plated brass push in fitting connects a 4 mm O.D nylon, polyurethane, polyethylene or Teflon tubing to a female M5 x 0.8 threaded connection at a 90-degree angle. The male M5 x 0.8 thread seals with use of an NBR o-ring. The body of male elbow nickel plated brass push in fitting can be rotated after installation. 4 mm tubing x M5 thread male elbow metal push in fitting is made of nickel plated brass for corrosion resistance, working temperature up to 150°C (302°F), and working pressure up to 20 bar (290 psi) for alternative to plastic ones. Male elbow nickel plated brass push in fitting is suitable for use in air, vaccum, water, oil, chemical and inert Gas. External tightening with a flat wrench.
Part #:
BPL 04-M5
Push-in Tubing O.D:
4mm
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Thread Sealing: O-ring
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 300PCS
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Thread Sealing: O-ring
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 300PCS
Dimensions of BPL 04-M5, 4 mm O.D Tubing, M5 x 0.8 Thread Male Elbow Nickel Plated Brass Push in Fitting
| Part No. | ΦD | R | B | E | ΦP | A | H |
| BPL 04-M5 | 4mm | M5 x 0.8 | 18.5mm | 17.5mm | 8mm | 4.5mm | 8mm |
There are no reviews for this product.
Write a review
BadExcellent