SPZA Union Cross | Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fitting
SPZA stainless steel push in fitting union cross is used to connect four tubes of the same diameter at right angles (cross configuration) for branching fluid distribution. Union cross stainless steel push in fitting is popular choice whenever there is a need to split fluid flow into every other direction. Stainless steel push in fitting union cross is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel push to connect fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. In this category you can find stainless steel fittings for hose with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Push-in Tubing O.D: From 4 mm to 16 mm and 1/8" to 1/2"
Body Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F