SPLF Female Elbow | Stainless Steel Push in Fitting, Stainless Steel Push to Connect Fitting
SPLF stainless steel push in fitting female elbow is used to connect a tubing to a male threaded connection at a right angle. Stainless steel push in fitting female elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Female elbow stainless steel fittings are available in both inch and metric sizes, and can be used with a variety of tubing materials. Female elbow stainless steel push to connect fittings have swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner. You can find stainless steel push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to R, PT, BSPT 1/2, and 10-24 UNC, 10-32 NUF, 1/8 NPT to 1/2 NPT for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-24 UNC to 1/2 NPT
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F