SPV Union Elbow | Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fitting
SPV stainless steel push in fitting union elbow is used to connect two tubes of same diameters at a 90-degree angle. It has equal push-to-connect tube connections on both ends. Stainless steel push in fitting union elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel, the FKM seal material is chemical-resistant. These stainless steel push in fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Union elbow stainless steel fittings are available in both inch and metric sizes, and can be used with a variety of tubing material includes FEP, PFA, nylon, polyurethane, polyolefin. In this category you can find stainless steel push-in fittings for hose with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Push-in Tubing O.D: From 4 mm to 16 mm and 1/8" to 1/2"
Body Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F